NB-IoT Suite Product Introduction
Profile Resource model Advantages Definitions
QuickStart
Products and Devices
Create Product Create Device
Device access process
User Guide
Rule Engine
Service Introduction Rule Configuration Basic Data Format SQL
Message queue Application Management
Service Introduction Controls Introduction Operating Instructions
Device Development Guide
Protocol introduction Object and attribute Development Guide Supported module list Obtaining SDK transplantation Document download
Application Development Guide
API Authentication API List Device management-related API
Add new device Obtain the resource list Update device information Query device details Query device information in batch Query device condition in batch Query device information according to IMEI Delete device
Query API at data point
Query device latest data in batch Check data point
Real-time command API
Real-time command-resource discovery Real-time command-resource observation Real-time command-read device resource Real-time command-write device resource Real-time command-command release
Cache command API
Cache command-read device resource Cache command-write device resource Cache command-command release Check the cache command list of specified device Check the details of specified cache command Cancel cache command
Trigger-related API
Add trigger Update trigger Check trigger Delete trigger
DTLS-related API
Check device bs_psk Update bs_psk Add acc_psk Edit acc_psk Check device acc_psk
API status code HTTP push
Service Introduction Service configuration Development Guide Push SDK
SDK download
Best Practices
Access based on module (5310) Access based on MCU
FAQ
Registration-related issue Protocol-related issue API-related issue OTA-related issue Application development issue Other issues
Service agreement
IMEI Complaint service agreement
Update Log

HTTP push

The platform has a HTTP push function, which can actively send relevant data and messages of the device in the format of HTTP/HTTPS POST requests to the application server.

Follow the steps below to enable the HTTP push service:

Step 1

Open the Developer Center interface, select Data Push -> HTTP Push, and click “Add Global Push”, as shown below:

推送入口

Step 2

Fill in the server URL address and custom token for data reception (the token can be used to verify whether the request is sent from OneNET), specify the data stream, select the data stream of the new data point to be pushed, and click “Associate”, as shown below:

推送配置

Step 3

In the pop-up menu bar, select the data stream containing the data to be pushed. The new data point in the selected data stream will be pushed through the push service, as shown below:

关联数据流模板

Step 4

Set the push interval and cumulative number as needed, as shown below:

  • If the push interval is set, data will be pushed at intervals.

  • If the cumulative number is set, messages will be accumulated to a certain number before data is pushed.

时间间隔

Step 5 Deploy the application server to receive services according to the application "Development Guide", and click “Add”. Then you can see that the service is enabled, as shown below:

配置成功

个搜索结果，搜索内容 “”

    0 个搜索结果，搜索内容 “”